Latest News!!! 06/08/2019 ~ Toy Soldier Previews & Hobby News ~ Mars Panzergrenadiers, Forces of Valor LCM-3. Plus Hat, Conte & Plastic Platoon & more.

D-Day

“On June 6, 1944, more than 160,000 Allied troops landed along a 50-mile stretch of heavily-fortified French coastline, to fight Nazi Germany on the beaches of Normandy, France. Gen. Dwight D. Eisenhower called the operation a crusade in which, “we will accept nothing less than full victory.” More than 5,000 Ships and 13,000 aircraft supported the D-Day invasion, and by day’s end, the Allies gained a foot-hold in Continental Europe. The cost in lives on D-Day was high. More than 9,000 Allied Soldiers were killed or wounded, but their sacrifice allowed more than 100,000 Soldiers to begin the slow, hard slog across Europe, to defeat Adolf Hitler’s crack troops.”

I took this statement above from https://www.army.mil/d-day/

D-Day (1)D-Day_2_largeThe 75th Anniversary of D-Day was a couple of days ago. One of the most iconic images we have of that day is that of the brave boys landing on the beaches and the LCM landing craft.

D-Day-Final-1DDay-troops

Logo2

FOV6

On the 75th Anniversary of D-Day Forces of Valor announced the are going to release new Landing Craft Mechanized, LCM-3 in 1/32 scale. The released a statement the other day too. I have added that below.

FOV7

We would like to take this special opportunity; 75th anniversary of D-Day Normandy landing, one of the most important battles during WW2, to announce our new 1/32 scale project, Landing Craft Mechanized, LCM-3. Forces of Valor / Unimax had produced the 1/72 scale LCM-3 back in 2008 and since we had taken over the FOV brand, we have always wonder why a 1/32 scale version had not been made in the past? So we began conducting some researches about the LCM-3 and eventually found out that a 1/32 scale LCM-3 version has a dimension of 47.6cm (Length) x 13.6cm (Width) and 13.5cm (Height), that would probably cost a fortune to make the molds, however since 8 months ago, we started our new 1/32 scale Sherman tank program, we have planned to release 2 variants of Sherman M4 and 8 variants of Sherman M4A3… (Sherman tanks have way too many variants so for M4A1 and M4A2 we have to reluctantly leave it until 2020)

That said… with nearly 10 models of 1/32 scale Sherman variants that would be rolling out in the next 12 months, a landing craft seems to be more than necessary to join our iconic 1/32 scale family and so 5 months ago, we had chosen the LCM-3 as a kick start of our landing crafts series.

One of the major concerns of FOV enthusiasts is how much metal parts would be used in every new product. We can firmly tell you that at least with 2003 FOV level, which means turret, gun barrel and top hull and for this particular LCM-3, at least the ramp, certain body parts would be made of die-cast metal.

Following post would be about the new FOV 1/32 scale US Sherman tank series.

Respect and praise to all the D-Days heroes!! http://www.forcesofvalor.com/

Mars

Mars Panzer Grenadiers9

Mars Panzer Grenadiers3Mars Panzer Grenadiers4Mars Panzer Grenadiers5Mars Panzer Grenadiers6Mars Panzer Grenadiers7Mars Panzer Grenadiers8

Here are some preview pictures of Mars’ new WW2 German Panzergrenadiers. There are 1/32 in scale and should be released in a few months. I like the color and some of the poses are nice. The last picture above is my favorite pose from this set.

conte-logo1

Conte1Conte2Conte3

Here are a few more pictures that Conte released of the Romans that will be released in plastic hopefully by the end of the year.

Hat1Hat2Hat3News1News2

Here are some pictures of Seven Years War Austrians by Hat in 1/32 scale. No release date on these. If we are lucky they will be released by the end of the year. It has only been almost 2 years now……

PP

News3News4News5News6

This slideshow requires JavaScript.

Mikhail of Plastic Platoon sent me some more pictures of the 7th Cavalry figures that they are making. The details are excellent. There is a debate going on with collectors about the uniforms and poses of this set. 

 

Warring Warbirds

Michael sent me some more pictures his latest projects.

Warring Warbirds1Warring Warbirds2Warring Warbirds3Warring Warbirds4Warring Warbirds5Warring Warbirds6Warring Warbirds7Warring Warbirds8

You can read more about Michael and Warring Warbirds here Interview with Michael Sreckov of Warring Warbirds. Plus some hobby news..

cropped-warhorse-miniatures-1

So far this year has been exciting with all the news and new releases. We didn’t even get to Chicago yet. Almost every week some one or something new pops up. That is it for now. Thank you for reading.

 

Interview with Michael Sreckov of Warring Warbirds. Plus some hobby news.

Warring Warbirds Logo

One thing about going to the toy shows is getting a chance to meet fellow collectors, dealers and company owners. Just to talk about our collections, their products or hobby news. It is almost like therapy, lol. I don’t have to many personal friends that are collectors. So it is fun to talk or explain things to people that actually know what you are talking about or share the same passion in collecting.

Egan

Eddie White and Rich Egan.

Or collectors you meet you can talk about the crafting of things. I have been looking into all kinds crafting builds, sculpting items or figures, casting & making molds the past few years. I find it really interesting when I come across someone that is currently creating things. Even if it is something that I might not personally collect. I like to learn what they are doing.

Collectors

Michael Sreckov on the right talking to fellow collector Thomas Kontos at the Midwest Toy Soldier Show.

A few months ago while I was at the Midwest Toy Soldier show I meet Michael Sreckov. He owns a small business called Warring Warbirds, Inc. They build hand crafted Airplanes and other unique items.

WW1

Horsa Glider MKI E3c

I remember seeing some pictures of his work being displayed in some of the toy soldier forums about the Chicago Toy Soldier Show. They are really impressive.

WW3

Michael found some time to answer a few questions.

Warring Warbirds

Warhorse Miniatures: Can you tell us a little about your background and how did Warring Warbirds get started?

 

Michael Sreckov: I started Warring Warbirds, Inc. about four years ago. I was at the Chicago Toy Soldier Show during the room trading as everyone loves to do. I have been going to this show since 1996 and been a toy soldier collector since I was 12. I loved to see companies like King and Country, Figarti and Britains go head to head in competition with each other bringing new innovated ideas and concepts to the toy soldier industry and to the toy soldier collector. They were always trying to do one up from each other with the so called “Wow factor” to there displays and products. For example the Deutsche Reichsbahn train set introduced on a beautiful diorama depicting a German Train station during WW2 that Figarti did or the awesome diorama’s that depicted snap shots of history that are breath taking that Andy & Gordon Nelson from King and Country would do when showcasing there artistic new figures and vehicles making there creations come alive in miniature.

SAIMEX CHICAGO 2018 02

Michael Sreckov continues:

It was my fellow collectors and I that would talk nonstop of the many wonders they would see room to room. My friend Hans gave me the idea that he would love to see more WWII aircraft to go with his figures and dioramas that he was buying from K& C and Figarti. Then it dawned on me that this was a niche I would love to fill, but how. You heard the saying when opportunity comes a knocking you start a rocking. It was at one of my brother-In-Laws family parties that my opportunity came. See my brother in-law wife’s family are Filipino. My sister in-law’s first cousin was a artist and wood carver. His family owns a mahogany forestry in the Philippines and they carve airplanes, boats and cars and other wooden products. I could not believe what I was hearing. I spoke to him about starting a model plane business that catered to the toy soldier collector. From there it began. I started to ask my fellow collectors what they would like to see in planes.

Horsa Glider MKI E3d

 

Michael Sreckov continues:

I would make prototypes like Horsa Gliders and Lancaster Bombers all in 1/32 and 1/30 scale like the toy soldiers and bring them to the show and showcase from the back of my car in the parking lot of the Chicago show. Every plane I built was sold and more people asking where they could get them. I started to think, If I could get orders from customers at the shows. I could start getting them made and delivered to them. I knew my customers, because I am that customer. That toy soldier collector that knows all the details from the exact colors, patterns and accessories of a soldier as to the details to a model plane of a Junkers JU-52 transport bomber. See the devil is in the detail and so am I when it comes to creating works of art. As you can see in the photos I attached.

Warbirds2

Warhorse Miniatures: What is the process with the designing of the planes?

 

Michael Sreckov: It takes 6 to 12 hours in research on the planes then a ten stage process: Carving, Interior build, Putty, Masking, Priming, Base coat painting, Masking, Secondary coat, Detailing, and Final sealer coating. Then the item is carefully packaged for shipping.

WW4

Warhorse Miniatures: Are they made of solid wood or a mixture of different materials?

 

Yes, they are made from Mahogany wood. The only other material would be metal land gear and polymer canopy’s.

WW2

Warhorse Miniatures: So I am guessing that most of your sales are at the shows & orders you receive by email. Do you do custom orders too? 

 

Yes at the shows and orders that we receive by email. We do custom orders, but these can take longer pending on the size and detail special pricing.

Warbirds3

Warhorse Miniatures: How much do you charge for these?

 

That depends on the size of the model, The level of detailing and shipping costs. For example a fighter plane 1/30 scale can be around $600 – $800 a model. Medium size range from $800-$1,500.00.  Larger planes under 48″wing span $1,500- $1,800 and then there is custom which we would quote a price.

Warbirds4

Warhorse Miniatures: Besides the planes do you do the dioramas too?

 

Yes. Typically bases for the model planes so they can be displayed. Like a 2 x 2 or 3 x 3 diorama base with a run way and area for adding toy soldiers,vehicles and buildings.

SAIMEX CHICAGO 2018 01

Warhorse Miniatures: And any other creations besides airplanes?

 

Well my good friend Marcus Thorsen of Thorsen Studios has made some beautiful dioramas for my plane displays which are for purchase. For example: We displayed the Hartenstein Hotel from the Movie Bridge Too Far. See pictures attached. 

Oosterbeek Hotel HartensteinOosterbeek Hotel Hartenstein1Oosterbeek Hotel Hartenstein2

Well that concludes the interview. Michael will be at the Chicago Toy Soldier Show this September. Stop by and say hello. Here is his contact information below. 

Michael Sreckov
Warring Warbirds, Inc.
3640 Waterscape Terrace
Elgin, Illinois 60124

michael@warringwarbids.com
Mobile: (708) 683-0518

Warbirds5Warbirds6Warbirds7Warbirds8Warbirds9Warbirds10

 

latest-news

 

ECTSS1ECTSS

It was announced on May 30th that the East Coast Toy Soldier Show will continue. It will be on Sunday, November 3rd 2019.

conte-logo1

We have more news about Conte. They released some information about their plastic figures on facebook. You can read that below.

Conte1

Conte2

Mr. C thought we should show this one, so you understand the process a bit.

We start with a wax original sculpt. Then we make ‘mold masters’ out of what is referred to as a ‘casting resin’. Once the mold masters are perfect, we send to the factory for review and prototyping. The gray figure on the right is a ‘mold master’ which is a virtually an exact copy of the original wax.(not shown) The cream colored figure on left is a plastic prototype made at the factory. Once the cream figure has been reviewed/modified/approved by Mr. C the factory can start making the heavy duty molds which ill produce the plastic soldiers we all have been waiting for.

You can see that what the factory is achieving is almost an exact copy of the mold master. Very slight shrinkage in size usually occurs; also the different colors can play ‘tricks’ with your eyes and make things look slightly different.

the great news here is that the final product looks to be true, faithful and beautiful ‘copies’ of our originals

(in the past, especially with product which we made in Canada, our beautiful originals were often heavily compromised, modified or changed at the factory thereby losing some of the action or sculpting excellence which we pride ourselves upon)

Conte3

Conte4

In answer to numerous similar questions:

1) we hope to show the first 4 charging attacking fighting poses in one fell swoop when factory prototypes are approved. We might even delay their unveiling a short time so they can be pictured with the 8 additional action sculpts which have NOT yet been sent to the factory.(like the centurion which we’ve previously shown here on FB)

2) many of the attacking/fighting poses DO have alternate heads, arms and such . we will try to prepare photos of the several alternate permutations.

3) no decision has been made on colors of plastic yet but red, silver , bronze seem the usual suspects

4) Yes, there are ‘casualties’. Thus far a falling wounded with spear in chest, a wounded prone on side, a dead face down, a dead face up have been finished as sculpts. Several at factory and several sit here on RC’s desk. 
Wounded on knee is almost finished as a sculpt.

5) Roman fort. Nothing to report here. We hope to do one if there is enough collector interest for Roman range. Right now, all action is towards figure sculpt and production and a large scale hand to hand battle.

6) Configuration of sets. NOTHING HAS BEEN FINALLY DECIDED. Having said that, we are leaning towards 12 and/or 16 figures per set.

7) Pricing. No conclusions yet. Need to factor in shipping from factory to USA, shipping once in USA to us, customs fees, production costs, sculpting costs, possible tariffs, packaging, costs of mold masters, etc. etc. This is much more involved than many collectors might realize. Our goal is to keep the price as low as possible for our fellow collectors while also being able to make product which is in keeping with(and better than much of our plastic from the past) our historical Conte standards

8) Yes there are centurions (yes plural), aquilifer, signifer, vexillarius etc. either in the mix already or otherwise coming soon. First versions of these ‘characters’ are all in action fighting poses. 
As I write this, I know that a brand new sculpt of a signifer who is attacking stabbing with sword in one hand and ‘flag’ in other is almost finished. A variation of this pose has him holding the ‘flag’ with 2 hands and using it like a spear.

9) What other Roman ranges (made by others) will these ‘go with’? We are designing these as a “conte” series with typical conte size and have given absolutely no thought at trying to match the size or ‘look’ of Romans made by others.(There are a lot of nice Romans by others)
The sculpting detail, the animation, the full-round designs, the ‘interaction ‘ of the figures within the range etc. are what we are focusing on. 

Each collector will have to decide for themselves whether our new sets ‘go with’ any of the other Romans out there….

Our Romans will , in general, be a tad shorter than our Barbarians. This is intentional and based upon historical fact and ancient writings. It was even recorded that the Barbarians often attempted to insult the Romans by calling them ‘pygmies’

10)When?

No set date yet. As soon as the first groupings go into mass production we shall have some updates.

We are as anxious as you to see these fellows in action and doing our best .

Lastly, Mr. C asked me to let you know that while he tries to answer all emails and letters, he cannot respond to all of the private inquiries and questions asking for special advance info or advance sneak peeks. He wants all collectors to have access to updates equally and at the same time. The best places for updates are here on FB or to be signed up (on our web page) for email blasts from us directly.

 

Mars

Mars Zombie Pirates1

Mars Zombie Pirates

Sergey sent me a picture of the new Zombie Pirates in green color. They should be out in June. My favorite one looks like Barbrossa.

PP

PP7PP8

I almost forgot about the leaked photos of the Plastic Platoon 7th Cavalry prototype sculpts. Plastic Platoon released these are some pictures were leaked. Hopefully we will see these by the end of the summer. Here are more pictures.

PP1PP2PP3PP4PP5PP6

 

cropped-warhorse-miniatures-1

Well that is it for now. Thank you for reading.